Kerr Pump & Supply is a Viking Pump Hygienic (formerly Wright Flow Technologies) distributor, offering customers solutions for unique challenges in fluid handling with a comprehensive, leading-edge technology portfolio, including new and re-manufactured products. Viking Pump Hygienic solutions brand is dedicated to meeting the pumping challenges of food, beverage, biotech and pharmaceutical manufacturers worldwide.

Viking Pump has been manufacturing hygienic pumps for over 40 years. Viking hygienic pumps offer maximum sanitary conditions, with a range of models to meet other conditions, such as:

  • Ultra hygienic (available EHEDG and 3A certified)
  • Cleanable, with CIP models available
  • Self draining
  • Roughing resistant WFI models
  • Low shear
  • Accurate, with WFT models that handle a range of viscosities accurately
  • Fluid containment, with single or double seals where necessary, and ATEX compliant models
  • Special material options from exotic alloys to low cost carbon steel models
  • Abrasive resistant options like specially coated internals, hard faced seals, and oversized rotors

In addition to local inventory, Kerr offers Viking Hygienic pump parts and a factory trained service department for hygienic pump repairs. Our service technicians are fully insured and available for all your service needs.

Viking Hygienic Pump distributor Kerr Pump & Supply offers the following products:

Centrifugal Hygienic Pump TR-IS and TR-C

Viking’s centrifugal hygienic pump range includes the TR-IS and TR-C series pumps.

The TR-IS series pumps are engineered for compliance with EHEDG standards in addition to 3A compliance, and feature hygienic internal seals.

  • Capacity – 0 to 1,040 GPM; 0 to 3,937 LPM
  • Pressure – 0 to 150 PSI; 0 to 10.2 Bar
  • Temperature – 0 to 300 °F; 0 to 150 °C
  • Viscosity – 0 to 800 cP

The TR-C series centrifugal hygienic pump features 316 L construction and a sanitary finish to comply with 3A standards. These low cost, open impeller pumps are available with clamp, flange, NPT, weldable, bevel seat, DIN, or SMS connections.

The TR-C+ delivers improved reliability and cleanability thanks to enhanced shaft and retainer designs. TR-C+ seal, case, adapter, and backplate are interchangeable with standard “C- Series” models TR-C and other “C-Series” pumps can be converted to TR-C+ with a simple kit.

  • Capacity – 0 to 1,040 GPM 0 to 3,937 LPM
  • Pressure – 0 to 137 PSI 0 to 9.4 Bar
  • Temperature – 0 to 250 °F 0 to 120 °C
  • Viscosity – 0 to 600 cP

 

Circumferential Piston Pumps – TRA10, TRA20 and Revolution

The circumferential piston range of pumps now offers a new Revolution™ pump along with the TRA10 and TRA20 offering a reliable positive displacement circumferential piston pumping principle that has been proven over many decades.

These pumps are constructed from cast iron, with stainless steel models optional. The TRA10, TRA20 and Revolution™ are all dimensionally interchangeable with Waukesha® for comparable models, making it easy to upgrade pumps.

TRA10 Hygienic Pump

CLEANABILITY

  • Easy disassembly for easy COP (Clean Out of Place)
  • Designed to 3A standards

PERFORMANCE

  • Efficient handling for low & high viscosity applications
  • Exclusive, non-galling WFT 808® alloy rotors standard; permits running at tighter clearances
  • High strength 17-4 PH single piece shaft standard on 0300 and larger
  • Helical gears, improving load carrying capabilities

EASE OF MAINTENANCE

  • Drop-in-place with TRA®20 & comparable manufacturer models
  • Interchangeable service parts with comparable manufacturer models
  • Easy disassembly

SPECIFICATIONS:

  • Capacity – 0 to 450 GPM; 0 to 102 m3/h
  • Pressure – 0 to 400 PSI; 0 to 27 Bar
  • Temperature – 0 to 300 °F; 0 to 150 °C
  • Viscosity – 0 to 910,000 SSU; 0 to 200,000 cST

TRA20 Hygienic Pump

CLEANABILITY

  • CIP (Clean In Place) design optional
  • Free draining cover with flat body profile option
  • Sealed shaft with o-ring on rotor & rotor nut

PERFORMANCE

  • Efficient handling for low & high viscosity applications
  • Exclusive, non-galling WFT 808® alloy rotors standard; permits running at tighter clearances
  • High strength17-4 PH single piece shaft standard
  • Improved load carrying capabilities

EASE OF MAINTENANCE

  • Drop-in-place with TRA®10 & comparable manufacturer models
  • Interchangeable service parts with comparable manufacturer models
  • Stainless steel bearing retainers standard, prevent rusting

SPECIFICATIONS

  • ​_Capacity – 0 to 450 GPM; 0 to 102 m3/h
  • Pressure – 0 to 500 PSI; 0 to 34 Bar
  • Temperature – 0 to 300 °F; 0 to 150 °C
  • Viscosity – 0 to 910,000 SSU; 0 to 200,000 cST

Revolution Hygienic Pump

CLEANABILITY

  • Efficient CIP (Clean In Place) ability is standard for all Revolution pumps
  • Self draining pump head from innovative cusps & cusp reliefs
  • Innovative seal design with no dead zones & a dynamic leak path
  • No dead zones on front cover

EASE OF MAINTENANCE

  • Fast, front loading seal changes while pump is still in line
  • Front access shimming for setting rotor clearance significantly reduces maintenance time
  • Convenient preventive maintenance parts kits available

PERFORMANCE

  • Improved volumetric efficiency in low & high viscosity applications
  • Up to 15% better flow performance than competitors’ CIP configuration with CPP version
  • Gentle handling of solids & shear sensitive products
  • Long-life durability from heavy duty shafts, bearings & helical gears
  • Less overhung load

SPECIFICATIONS

  • Capacity – 0 to 761 GPM; 0 to 173 m3/h
  • Pressure – 0 to 450 PSI; 0 to 31 Bar
  • Temperature – 0 to 300 °F; 0 to 150 °C
  • Viscosity – 0 to 2,000,000 SSU; 0 to 440,000 cST

Rotary Lobe Pumps

Viking Pump is well known for its design and manufacture of rotary lobe pumps for over 30 years, including top quality pumps such as the SteriLobe, Classic+ and RTP pumps. Each with its distinct place in the market, this range of hygienic pumps can be used across the sanitary market from food to high end pharmaceuticals plus many applications in fine chemicals and more industrial applications.

These rotary lobe pumps are constructed from cast iron, or optionally stainless steel or aluminum.

SteriLobe Hygienic Pump

CLEANABILITY

  • Cover joint profile improves hygienic characteristics & self-draining capabilities
  • Clean & corrosion resistant stainless gear cover & powder coated bearing housing

EASE OF MAINTENANCE

  • Front loading seals can be changed while the pump is still in-line
  • Seal positioned for optimal lubrication, maximizing seal life
  • Hassle free gearbox maintenance with sealed for life bearings

PERFORMANCE

  • Standard bi-wing rotors offer application flexibility & good solids handling capabilities
  • Multi-lobe rotors reduce shear & pulsation effect; ideal for sensitive media
  • Innovative cusps with reliefs allow for easier cleaning and self draining with improved efficiency

SPECIFICATIONS

  • Capacity – 0 to 753 GPM; 0 to 171 m3/h
  • Pressure – 0 to 218 PSI; 0 to 15 Bar
  • Temperature – 0 to 300 °F; 0 to 150 °C
  • Viscosity – 0 to 910,000 SSU; 0 to 200,000 cST

Classic + Hygienic Pump

CLEANABILITY

  • Modular pump design promotes easy disassembly for COP (Clean Out of Place) & CIP (Clean In Place)
  • Casing profile cusps maximize efficiency & draining capability

PERFORMANCE

  • Timed, non-contacting rotors minimize shear while providing extended run-dry capability
  • Helical timing gears provide high torque & quieter operation for extended pump life
  • Tapered roller bearings provide higher operating speeds & better discharge pressures

EASE OF MAINTENANCE

  • Removable foot for easier placement
  • Classic RLP design

SPECIFICATIONS

  • Capacity – 0 to 832 GPM; 0 to 189 m3/h
  • Pressure – 0 to 174 PSI; 0 to 12 Bar
  • Temperature – 0 to 355 °F; 0 to 180 °C
  • Viscosity – 0 to 910,000 SSU; 0 to 200,000 cST

RTP Hygienic Pump – Perfect for Stainless Steel Road Tankers

Designed specifically for the hygienic stainless steel road tanker industry, the RTP outperforms the competition by providing higher capacity, higher pressure and unmatched efficiency. The RTP can also reduce loading and unloading time by over 30%. This increased performance, along with advanced durability, application flexibility, ease of installation and ease of maintenance provide a complete solution for your hygienic tanker needs.

CLEANABILITY

  • The simple design behind the rotor makes strip cleaning easy and fast
  • Choose the cleaning process that fits your needs: COP (Clean Out of Place) or CIP (Clean In Place)

EASE OF MAINTENANCE

  • Innovative front loading seal design enables quick inspection and easy servicing
  • Sealed gearcase with long-life lubrication eliminates oil inspection and filling
  • Easy to service design requires no special tools for disassembly and eliminates need for end clearance adjustments

PERFORMANCE

  • Easily handles higher viscosity liquids with improved pressure capabilities for faster unloading
  • Excellent displacement/weight ratios, meaning more in the tank & less in the cabinet
  • Precision helical gears, rotors & shaft design, with optimized bearing position, minimize overhung load – extending seal & bearing life

SPECIFICATIONS

  • Capacity – 0 to 338 GPM; 0 to 76.8 m3/h
  • Pressure – 0 to 174 PSI; 0 to 12 Bar
  • Temperature – 0 to 300 °F; 0 to 150 °C
  • Viscosity – 0 to 910,000 SSU; 0 to 200,000 cST

RTPE Hygienic Pump – Essential for your Chemical Tanker System

For too long, cast iron pumps have compromised the integrity of chemicals carried in stainless steel road tankers. Designed specifically for the chemical transport industry, the RTPe stainless steel pump delivers that essential missing component. Better yet, it provides a cost-effective solution to this problem, while still outperforming the competition in both speed and reliability.

Based on the industry-leading hygienic RTP, the RTPe incorporates all of the features your chemical tanker needs, while eliminating those that it does not. Protect your investment and make your chemical transport business even stronger. The RTPe is the essential component to complete your chemical tanker system.

CLEANABILITY

  • The simple design behind the rotor makes strip cleaning easy and fast
  • Choose the cleaning process that fits your needs: COP (Clean Out of Place) or CIP (Clean In Place)

EASE OF MAINTENANCE

  • Innovative front loading seal design enables quick inspection and easy servicing
  • Sealed gearcase with long-life lubrication eliminates oil inspection and filling
  • Easy to service design requires no special tools for disassembly and eliminates need for end clearance adjustments

PERFORMANCE

  • Wide range of chemical compatibility
  • Efficiently handles both low and high viscosity liquids with improved pressure capabilities for faster loading and unloading
  • Excellent displacement/weight ratios, which means more in the tank and less in the cabinet (1 l/rev. / 0.264 USG/rev.)
  • Precision helical gears, rotors and shaft design, with optimized bearing position, minimize overhung load – extending seal & bearing life

SPECIFICATIONS

  • Capacity – 0 to 264 GPM; 0 to 173 m3/h
  • Pressure – 0 to 145 PSI; 0 to 10 Bar
  • Temperature – 0 to 230 °F; 0 to 110 °C
  • Viscosity – 0 to 910,000 SSU; 0 to 200,000 cST

Watch Kerr Pump & Supply – Wright Flow Technologies Videos

(To see video choices, open playlist using the upper menu bars) Playlist-Menu-Icon

Let the Kerr Sales Engineers design the right solution for your application